Thickness ranges are typical for abrasive waterjet. Exact max depends on alloy grade and part geometry — confirm on quote.
| Material | Typical thickness we cut | Why waterjet |
|---|---|---|
| Stainless steel (304 / 316 / 400 series) | 0.5 – 120 mm | No HAZ, no rust-risk from heat; clean edges |
| Carbon steel / mild steel | 0.5 – 200 mm | Thick plate without distortion |
| Titanium & titanium alloy (Gr.2 / Gr.5) | 0.5 – 80 mm | Cold cut — no ignition, no alpha-case |
| Aluminum (5052 / 6061 / 7075) | 0.5 – 150 mm | No burr, no dross |
| Copper | 0.5 – 60 mm | No reflective-material issue (unlike laser) |
| Brass | 0.5 – 50 mm | Clean, no heat stain |
| Nickel-based alloy (Inconel / Hastelloy) | 0.5 – 60 mm | Cold cut — preserves corrosion resistance |
| Cobalt-chrome alloy | 0.5 – 40 mm | Medical-grade, no micro-cracks |
| Tool & die steel | 0.5 – 100 mm | No hardening change at the edge |
| Natural & engineered stone (granite / marble / quartz) | 3 – 60 mm | No chipping, no dust hazard on site |
| Glass (tempered-except / float / optical) | 1 – 40 mm | Stress-free cut, no crack propagation |
| Ceramic & technical ceramic | 1 – 30 mm | No fracture from mechanical load |
| Acrylic / PMMA & engineering plastic | 1 – 80 mm | Polished, flame-free edge |
| Carbon fiber composite (CFRP) | 0.5 – 40 mm | No delamination, no fraying |
| G10 / FR4 composite | 0.5 – 50 mm | Clean, no glass-fibre tear-out |
We grade edge finish so you pay only for what the part needs.
Visible taper, fine for structural and hidden features. Fastest, cheapest.
Near-vertical edge, minimal taper — for exposed or fit-critical faces.
Light edge dressing on request for handling-sensitive parts.